英国最大赌博365网站_英国best网赌正规平台是最具公信力品牌,以真人视讯;电子游戏及体育赛事等百种游戏深受玩家喜爱,英国最大赌博365网站_英国best网赌正规平台成为亚洲最受欢迎的线上娱乐平台.

  • <nav id="32424"><acronym id="32424"></acronym></nav>
  • <input id="32424"></input>

    <tbody id="32424"></tbody><tt id="32424"></tt>
      <form id="32424"></form>
    1. <rt id="32424"></rt>

    <rt id="32424"></rt>

    <menuitem id="32424"><acronym id="32424"></acronym></menuitem>
  • <rt id="32424"><strike id="32424"><sub id="32424"></sub></strike></rt>

    <font id="32424"></font>

  • <output id="32424"><u id="32424"><tbody id="32424"></tbody></u></output>
  • <u id="32424"><tr id="32424"></tr></u>
    <strong id="32424"></strong>
    <form id="32424"><var id="32424"></var></form>
    English | 添加收藏 | 设为{{英国最大赌博365网站_英国best网赌正规平台主词}主词}
    您所在的位置:网站{{英国最大赌博365网站_英国best网赌正规平台主词}主词} > > 产品中心 > 汽车线束绝缘材料 > PE汽车线125℃/150℃辐照交联阻燃汽车线料(含卤) FEJZ125R, FEJZ150R
    125℃/150℃辐照交联阻燃汽车线料(含卤) FEJZ125R, FEJZ150R
    125/150℃ Irradiation Cross-linkable Halogenous Flame-retardant Automotive Cable Compound ...
    型号:0

    参考价:¥

    说明:如您对该产品感兴趣{{英国最大赌博365网站_英国best网赌正规平台主词}主词},请在此输入您的手机号将本产品的地址 发送至您手机上。
    Product Description and Application 产品描述和用途
    125℃/150℃Irradiation cross-linkable flame-retardant automotive cable compounds which are produced with mixing, plasticizing and pelletizing process, regards polyolefin resin as the basic raw material, adds flame-retardant, antioxidant and sensabilizer. The highest working temperature are respectively 125℃and 150℃. The cables with it can meet JASO D 611 Standard. These products are suitable for extruding insulation layers of JASO Standard car cables.
    125℃/150℃辐照交联阻燃汽车线料以聚烯烃树脂为主要原料,加入阻燃剂,抗氧剂{{英国最大赌博365网站_英国best网赌正规平台主词}主词},助交联剂,经混炼{{英国最大赌博365网站_英国best网赌正规平台主词}主词}{{英国最大赌博365网站_英国best网赌正规平台主词}主词}、塑化{{英国最大赌博365网站_英国best网赌正规平台主词}主词}、造粒而得,最高工作温度分别为125℃和150℃{{英国最大赌博365网站_英国best网赌正规平台主词}主词}。制成电线后可以满足JASO D 611标准{{英国最大赌博365网站_英国best网赌正规平台主词}主词},适用于日标汽车线挤出绝缘层{{英国最大赌博365网站_英国best网赌正规平台主词}主词}。
     
    Processing Indicator 加工工艺
    General PVC or PE extruder is possible for the production of it. Recommend screw extruder with L/D≥25. It is better to put one 80 mesh filter on the position of screen while extruding. Temperatrue range changes according to different conditions of extruding equipment. Below temperature is just for boot debugging.
    本产品可采用普通PVC或PE挤出机进行生产{{英国最大赌博365网站_英国best网赌正规平台主词}主词}{{英国最大赌博365网站_英国best网赌正规平台主词}主词},建议螺杆长径比L/D≥25,挤出过程中可在网板放置一层80目滤网{{英国最大赌博365网站_英国best网赌正规平台主词}主词}。下列各温度可作为开机调试的参考:
    Size规格  Z1 Z2 Z3 Z4 H1 H2 H3 H4
    0.35~0.75 165 175 185 185 190 190 190 190
    ≥1.0 165 170 175 180 180 180 180 180
     
    Conductor preheated to 110 ℃, and warm bath temperature about 40~60℃
    导体预热至110℃,温水槽温度40~60℃左右。
     
    Irradiation Process辐照工艺
    Irradiation dose of irradiation cross-linkable polyolefin automotive cables compound should be given according to thermal strength requirements (note: different accelerators with the same irradiation dose will cause different thermal strength values). The thermal strength shoul be controlled between 25%-40%. Generally speaking, the more bigger conductor, the larger irradiation dose amount.
    辐照交联型聚烯烃汽车线的辐照剂量应根据应以热延伸达到要求为准(不同单位加速器按同一辐照剂量{{英国最大赌博365网站_英国best网赌正规平台主词}主词},其热延伸值不一样){{英国最大赌博365网站_英国best网赌正规平台主词}主词},本产品热延伸需控制在20%~40%范围内{{英国最大赌博365网站_英国best网赌正规平台主词}主词},导体越大{{英国最大赌博365网站_英国best网赌正规平台主词}主词},辐照剂量应适当的提高。
     
    Attentions 注意事项:
    1)The compound should be dried before using if the package is broken. Once package is open, recommend to run out within 12 hours.
    原料破包需烘干后才能使用,材料一经开封,建议12小时之内用完{{英国最大赌博365网站_英国best网赌正规平台主词}主词}。
    2)Please ensure the screw, barrel , hopper are thoroughly cleaned before operation. Avoid bringing impurities while processing.
    加工前确保螺杆、机筒{{英国最大赌博365网站_英国best网赌正规平台主词}主词}、加料斗彻底清理干净{{英国最大赌博365网站_英国best网赌正规平台主词}主词},加工过程中严禁带入杂质。
    3)If you need a faster extrusion. Please accelerate screw speed gradually to avoid inadequate plasticizing which may cause rough surface of the cables.
    如果要快速挤出时{{英国最大赌博365网站_英国best网赌正规平台主词}主词},请慢慢逐渐加快螺杆转速{{英国最大赌博365网站_英国best网赌正规平台主词}主词}{{英国最大赌博365网站_英国best网赌正规平台主词}主词},以免塑化不良{{英国最大赌博365网站_英国best网赌正规平台主词}主词}{{英国最大赌博365网站_英国best网赌正规平台主词}主词},电缆表面毛糙。
     
    Physical and Electrical Properties 物理和电气性能
    Item
    试验项目
    Unit
    单位
    FEJZ125D FEJZ150D
    Tensile Strength 拉伸强度 MPa ≥12.5 ≥12.5
    Elongation at Break 断裂伸长率 % ≥250 ≥250
    Density 密度 g/cm3 ≤1.35 ≤1.35
    Dielectric Strength
    介电强度
    MV/m ≥20 ≥20
    Thermal Aging Condition
    热老化条件
    / 150℃×240h 180℃×240h
    Tensile strength after aging
    老化后拉伸强度
    MPa ≥12.5 ≥12.5
    Tensile Strength Variation after Aging
    老化后拉伸强度变化率
    % ±20 ±20
    Elongation After Aging
    老化后断裂伸长率
    % ≥250 ≥250
    Elongation Variation after Aging
    老化后断裂伸长率变化率
    % ±20 ±20
    Brittle Temperature with Impact
    冲击脆化温度
    -40 -40
    20℃Volume Resistivity
    20℃体积电阻率
    Ω m ≥1.0×1012 ≥1.0×1012
    Hot Set Test Condition
    热延伸试验条件
    200℃×0.2MPa×15min
    Hot Elongation
    负荷下伸长率
    % ≤100 ≤100
    Permanent Deformation after Cooling
    冷却后永久形变
    % ≤5 ≤5
    Oxygen Index
    氧指数
    % ≥22 ≥22
     
    Note: tensile speed 100mm/min or 50mm/min       注: 拉伸速度100mm/min或者50mm/min
    英国最大赌博365网站_英国best网赌正规平台
  • <nav id="32424"><acronym id="32424"></acronym></nav>
  • <input id="32424"></input>

    <tbody id="32424"></tbody><tt id="32424"></tt>
      <form id="32424"></form>
    1. <rt id="32424"></rt>

    <rt id="32424"></rt>

    <menuitem id="32424"><acronym id="32424"></acronym></menuitem>
  • <rt id="32424"><strike id="32424"><sub id="32424"></sub></strike></rt>

    <font id="32424"></font>

  • <output id="32424"><u id="32424"><tbody id="32424"></tbody></u></output>
  • <u id="32424"><tr id="32424"></tr></u>
    <strong id="32424"></strong>
    <form id="32424"><var id="32424"></var></form>